Omron C200H-TV Series Operation Manual page 17

Wiring
Terminal Block
Connections
Compensating Conductors
Type of thermocouple
Symbol Previous
symbol
(reference)
B ---
R ---
S ---
K CA
E CRC
J IC
12
Crimp terminals are recommended for the wiring. Take care not to overtighten
the terminal screws. Tightening torque must not exceed 78 N j cm (8 kg j cm).
Crimp Terminals
The screws on the terminal block are M3.5 self-rising terminal screws. Use the
following types of M3.5 crimp terminals.
Soldered Lead
Strip insulation from 7 to 10 mm at the end of the wire and carefully solder the
lead.
Connect a thermocouple with the appropriate compensating conductor from the
table below.
Compensating conductor
Symbol Previous
symbol
(reference)
BX-G ---
RX-G, SX-G ---
RX-H, SX-H ---
KX-G WCA-G
KX-GS WCA-GS
KX-H WCA-H
KX-HS WCA-HS
WX-G WCA-G
WX-H WCA-H
VX-G WCA-G
EX-G WCRC-G
EX-H WCRC-H
JX-G WIC-G
JX-H WIC-H
7 mm max.
7 mm max.
É É É
É É É
7 to 10 mm
Classification by y
application and li ti d
+ conductor
tolerance
General-purpose, Copper
standard class t d d l
Heat-resistant,
standard class
General-purpose, Alloy with nickel y
standard class t d d l or chrome as h
major major
constituent
Heat-resistant,
standard class
Heat-resistant,
precision class
General-purpose, Iron
standard class
Heat-resistant,
standard class
General-purpose, Copper
standard class
Alloy with nickel
General-purpose,
or chrome as
standard class
j
major
Heat-resistant,
constituent
standard class
General-purpose, Iron
standard class
Heat-resistant,
standard class
Section 2-3
10
Constituent materials
– conductor
Copper
Alloy with copper y
or nickel as major i k l
constituent
Alloy with nickel as y
major constituent j tit
Alloy with copper
or nickel as major
constituent tit t
j
t
j