Fax Transmission Service Check - Dell 3333dn Service Manual

Hide thumbs Also See for 3333dn:
Table of Contents

Advertisement

Fax transmission service check

Note: Before performing this service check, verify that the correct country code for the MFP is selected. This
setting must match the country in which the MFP is used to transmit and receive faxes. If the setting is wrong,
the modem settings can be changed in the Fax/SE menu. See step 14. These settings should only be changed
with guidance from your second-level support.
Step
1
Is the phone line properly connected to the
modem card and the wall jack?
2
Properly connect the phone line to the
modem card and wall jack.
Did this fix the problem?
3
Test the phone line's ability to send and
receive calls.
Did the phone line work properly?
4
Use the MFP on a properly functioning
phone jack.
Did this fix the problem?
5
Is the phone line being used by the MFP an
analog line?
6
Is the line being used a VOIP line?
7
Have the system administrator verify that
the VOIP server is configured to receive
faxes.
Is the server properly configured?
8
Is the MFP on a PABX?
9
Enable Behind a PABX under fax settings
in the Administration menu.
Did this fix the issue?
10
Is a dial prefix needed to get an outside
line?
11
Try sending a fax using a dial prefix.
Did the fax transmit?
12
Is the fax failing to send to one specific
destination?
13
Check the device that cannot receive a fax.
Can it send a fax?
14
Press **411 to enter the Fax/SE Menu.
Select "Print Logs".
Print the T30 transmission log. Check the
error being reported with the fax error code
table. See
"Fax error codes" on
page
2-31. Perform the suggested
resolution for the error.
Did this fix the problem?
2-64
Service Manual
Questions / actions
Yes
Go to step 3.
Problem resolved
Go to step 5.
Problem resolved.
Go to step 8.
Go to step 7.
Go to step 8.
Go to step 9.
Problem fixed.
Go to step 11.
Problem fixed.
Go to step 13.
Go to step 14.
Problem resolved.
No
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 6.
Go to step 8.
Stop here. The issue is
VOIP related. The VOIP
provider needs to change
the server configuration.
Go to step 10.
Disable Behind a PABX,
and go to step10.
Go to step 12.
Go to step 12.
Go to step 14.
Stop here. The issue is with
the other device.
Go to step 15.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3335dn

Table of Contents