Scanner Tests
ASIC Test
A pattern appears and ASIC Test Passed displays. If xxxxxx displays, the test was unsuccessful.
Press Stop
Feed Test
To run the Scanner Feed test:
1. Touch
2. The panel displays the setting's current value
Letter, Legal, or A4.
3. Touch START to begin.
Running Flatbed... displays.
Press 4 to exit the test.
4. Touch Back to return to the Diagnostics Menu.
Sensor Tests
The following tests are available:
P - Sensor (ADF Paper Present)
A - Sensor (ADF cover closed interlock)
F -Sensor (FB scanner cover interlock)
1 - Sensor (ADF sensor 1)
2 - Sensor (ADF sensor 2)
H - Sensor (FB Home position)
1. Touch
2.
The display will show P, F, H, A, 1, 2 in a vertical column.
Note: Every scanner sensor does not need to be tested when Scanner Tests is selected.
3-34
Service Manual
to return to the SCANNER TESTS menu.
to select Feed Test from the SCANNER TESTS menu.
to select Sensor Test from the SCANNER TESTS menu.
[setting's current value]
. Use the arrows to select from