Output Bin Tests; Feed Tests (Output Bins); Sensor Test (Standard Output Bin) - Dell 3333dn Service Manual

Hide thumbs Also See for 3333dn:
Table of Contents

Advertisement

3. Select the sensor to test. Various sources have different combinations of sensors. See the table below:
Tray sensor support by source
Source
Tray 1
Tray 2
Multipurpose tray
Envelope feeder
[sensor selected]=Open displays.
Empty—Input tray empty sensor
Low—Input tray paper low sensor
passThru—Input tray pass thru sensor
4. Once this message displays, the servicer can manually actuate each sensor. The tray empty sensor can be
actuated by hand, however a sheet of paper can be used to cover the pass thru sensor. When the sensor is
closed, Closed displays; when the sensor is open, Open displays.
5. Press Stop

Output bin tests

Feed Tests (output bins)

Use these tests to verify that media can be fed to the standard output bin. No information is printed on the
media fed to the output bin, because the printhead is not engaged during this test. These tests can use any
media size or envelope supported by the printer.
To run the Feed Tests for the output bins:
1. Touch
2. Touch
3. Touch
Single—feeds one sheet of media from the selected source.
Continuous—media continues feeding from the selected source until Stop
Touch Back to return to OUTPUT BIN TESTS.

Sensor Test (standard output bin)

This test is used to verify if the standard bin sensor is working correctly.
To run the Sensor Test for the standard bin:
1. Touch
2. Touch
3. Manually actuate the bin sensor by moving the flag in and out of the sensor, and the display changes.
The following screen is displayed:
Bin Empty: empty or Bin Empty: full.
4. Press Stop
Empty
(Input tray empty
sensor)
X
X
X
X
to exit the test.
to select Feed Tests from the OUTPUT BIN TESTS.
to select the output bin you want the paper to exit into.
to select either Single or Continuous.
to select Sensor Test from OUTPUT BIN TESTS.
to select Standard Bin from Sensor Tests.
to exit the test.
Low
(Input tray paper low
sensor)
X
X
passThru
(Input tray pass thru
sensor)
X
is pressed.
3-27
Diagnostic aids

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3335dn

Table of Contents