Polaris Sportsman 400 Service Manual page 356

Hide thumbs Also See for Sportsman 400:

Table of Contents

BRUSH INSPECTION/REPLACEMENT, CONT.

6. Place a wrap of electrical tape on the threads of the

terminal bolt to prevent O-Ring damage during

reinstallation.

7. Install the O-Ring over the bolt. Make sure the O-ring is

fully seated.

8. Remove the electrical tape and reinstall the two small

phenolic washers, the large phenolic washer, flat

washer, and nut.

- projex@inbox.lv -

Show Quick Links

Chapters

Table of Contents