Polaris Sportsman 400 Service Manual page 31

RECOMMENDED LUBRICANTS - QUICK REFERENCE
LUBRICANTS AND MAINTENANCE PRODUCT PART NUMBERS ARE LISTED ON PAGE 2.4. REFER
TO SPECIFICATIONS CHAPTER 1 FOR CAPACITY INFORMATION.
Item
Engine Oil Polaris Premium 4
Synthetic, 0W/40
Transmission Polaris Synthetic Gear
Case Lubricant
Front Gear Case Premium Front Gearcase
Fluid or GL5 80-90 Gear
Lube
Gear Shift Selector Polaris 0W/40 Synthetic
Box Engine Lubricant or
10W Motor Oil
Coolant Level Polaris Premium 60/40
Pre-mixed Antifreeze/
Coolant or a 50/50 mixture
high quality antifreeze/
coolant and distilled water
Front Hubs Premium Demand Drive
Hub Fluid
Brake Fluid Polaris DOT 3 Brake Fluid Fill to indicated level inside reservoir.
COLD WEATHER KITS FOR 4 CYCLE ATVS
Oil Tank Cover -- PN 287187
Engine Heater -- PN 2871507
Oil Tank Heater -- PN 2871873
- projex@inbox.lv -
Type
Add to proper level on dipstick.
Refer to procedures outlined later in this
chapter.
Refer to procedures outlined later in this
chapter.
Oil in selector box should be at the center
line of the shift selector plungers. Do not
overfill or the selector may hydro-lock.
Fill reservoir tank to full line. Add if neces-
sary. If reservoir was empty or extremely
low, allow engine and cooling system to
cool completely and check level in radia-
tor. Fill to top of filler neck.
Fill hub at 4:00 or 8:00 position until fluid
trickles out. Do not force fluid into hub.
MAINTENANCE
Notes See
Pages
2.26-2.27
2.10
2.9
8.4
2.22
2.33
2.35
2.3