TRANSMISSION DISASSEMBLY, CONT.
26. Using a brass hammer or a press, drive the shaft,
bearing, retaining ring, and seal out of the housing
from rear to front.
27. Slide seal off shaft and remove snap ring and
shims. Record # of shims and thickness of each for
reference.
28. Inspect center shaft bushing for wear. If necessary,
remove with the large end of bushing drive tool.
Bushing Drive Tool
PN 2871697
29. Remove all remaining seals from transmission cases
and clean all parts thoroughly.
- projex@inbox.lv -
Housing
TRANSMISSION
Seal
Retaining Ring
Shim(s)
Bearing
Shaft
8.19