Emulations; Overview - Printronix T5000 User Manual

Chapter 3

EMULATIONS

EMULATIONS

Overview

This section covers the following emulations:
•
Coax (page 128)
•
Twinax (page 131)
•
SPC Coax (page 134)
•
SPC Twinax (page 135)
•
IPDS (page 136)
•
TN5250 (page 138)
•
IGP/PGL (page 140)
•
IGP/VGL (page 142)
•
P-Series (page 145)
•
P-Series XQ (page 148)
•
Serial Matrix (page 150)
•
Proprinter XL (page 152)
•
Epson FX (page 154)
You can select emulation default parameters directly from the control panel, or
by control codes as explained in the appropriate Programmer's Reference
Manual.
IMPORTANT
BEFORE you reconfigure an emulation, print a configuration sheet to
see all current settings.
Standard C/T Interface
With a standard coax interface, the printer emulates the following IBM coax
printer models:
•
3287 Models 1 and 2
•
4234 Models 1
With a standard twinax interface, the printer emulates the following IBM
twinax printer models:
•
4234 Model 2
•
5225 Models 1, 2, 3, and 4
NOTE: The standard Coax/Twinax emulation selection will only be available
For more information, refer to the Coax/Twinax Programmer's Reference
Manual.
124
if Coax or Twinax is selected from the C/T PORT main menu.