Camshaft Installation - Honda GX690 Workshop Manual

CAMSHAFT INSTALLATION

Open the valve lifters in the crankcase.
Install the camshaft (1) to the crankcase (2) by aligning
the punch marks (3) on the camshaft and the crankshaft
(4) (marked on the timing gear).
BREATHER DISASSEMBLY/
ASSEMBLY
Remove the charge coil (page 8-6).
STOPPER PLATE
SCREW(3 x 8 mm)
1 N·m (0.1 kgf·m, 0.7 lbf·ft)
BREATHER COVER
BOLT(6 x 14 mm) (3)
OIL OUTLET VALVE
BREATHER FILTER
INSTALLATION:
Install the breather filter until it is
fully seated on the end.
(1)
(4)
CRANKCASE
(2)
(3)
15-5