Crankshaft Oil Seal - Honda GX690 Workshop Manual

CRANKSHAFT OIL SEAL

REPLACEMENT (CRANKCASE COVER
SIDE)
LOCATION
CRANKSHAFT OIL SEAL
(38 x 58 x 9 mm)
CRANKSHAFT OIL SEAL (38 x 58 x 9
mm)
Remove the crankcase cover (page 15-2).
Remove the oil seal (1) from the crankcase cover (2).
Apply oil to the outer surface of a new oil seal.
Drive the new oil seal in the position as shown using the
special tools.
TOOLS:
Driver handle 15 x 135L (3)
Oil seal driver attachment
60 mm (4)
Apply grease to the lip of a new oil seal.
07749-0010000
(1)
07GAD-PG40100
(2)
CRANKCASE
(3)
(4)
1.0 mm
(0.04 in)
15-13