Oil Pressure Test - Honda GX690 Workshop Manual

OIL PRESSURE TEST

Check the engine oil level (page 3-3).
Remove the oil pressure switch (1) or sealing plug (2).
Install the special tools (1)(2).
TOOLS:
Oil pressure gauge attachment (1) 07406-0030000
Oil pressure gauge set (2)
TORQUE: 9 N·m (0.9 kgf·m, 6.6 lbf·ft)
Tighten the oil pressure gauge attachment to the
specified torque. Do not overtighten the attachment to
avoid damaging the crankcase threads.
Start the engine and allow it to warm up for 10 minutes.
While the engine is at idle, measure the oil pressure.
OIL PRESSURE:
2.8 kgf/cm
If the oil pressure is less than the specification, inspect
the oil pump (page 13-4).
Remove the special tools.
07506-3000000
2 (39.8 psi) / 2,000 min -1 (rpm) and more
LUBRICATION SYSTEM
FRONT MOUNT
TYPE:
(1)
SIDE MOUNT
TYPE:
(1)
FRONT MOUNT TYPE:
(1)
SIDE MOUNT TYPE:
(1)
(2)
(2)
(2)
(2)
13-3