Starter Motor Disassembly - Honda GX690 Workshop Manual

STARTING SYSTEM

STARTER MOTOR DISASSEMBLY/

ASSEMBLY
DISASSEMBLY
TERMINAL COVER
ARMATURE
ASSEMBLY:
Visually inspect the commutator
surface for dust or other damage.
If necessary, wipe it with a clean
lint-free cloth. If rusted or
damaged, dress with a fine
emery paper.
THROUGH BOLT (2)
COMMUTATOR
END FRAME
NEEDLE BEARING
BRUSH HOLDER
INSULATOR
BRUSH SPRING
10-4
MAGNETIC SWITCH
OVERRUNNING
CLUTCH
CLUTCH STOP
COLLAR A
CLUTCH STOP
COLLAR B
BRUSH
BRUSH HOLDER
SNAP RING
DISASSEMBLY:
PINION DRIVE Hold the armature (1) upright and
LEVER drive the clutch stop collar A (2).
Then remove the snap ring (3).
(3)
(1)
YOKE
ASSEMBLY:
Make sure that there is no
obstruction on the magnets.
(2)
NUT (2)
DRIVE HOUSING