Honda GX690 Workshop Manual page 53

LOWER SHROUD REMOVAL/
INSTALLATION
Remove the fan cover (page 5-2).
L. LOWER SHROUD
HIGH TENSION CORD GROMMET
INSTALLATION:
Align the grommet (1) with the
cutout in the L. lower shroud (2) as
shown.
R. LOWER SHROUD
HIGH TENSION CORD GROMMET
INSTALLATION:
Clamp the high tension cord (1) to
the inside of the R. lower shroud (2)
and align the grommet (3) with the
cutout in the shroud as shown.
(1)
(2)
(3)
(2)
(1)
(2)
ENGINE WIRE
HARNESS GROMMET
BOLT(6 x 20 mm)
(3)
R. LOWER
SHROUD
BOLT(6 x 16 mm) (2)
COVER
BOLT(6 x 20 mm)
L. LOWER
SHROUD
BOLT
(6 x 16 mm)
ENGINE WIRE HARNESS
INSTALLATION:
Pass the engine wire
harness through the R.
lower shroud and align the
5-5