Context Configuration; System Configuration; Finding Configuration Errors - Cisco ASR 5000 Series Administration Manual

▀ Verifying the Configuration

Context Configuration

Verify that your context was created and configured properly by entering the following command:
The output shows the active context. Its ID is similar to the sample displayed below. In this example, a context named
test1 is configured.

System Configuration

Verify that your entire configuration file was created and configured properly by entering the following command:
This command displays the entire configuration including the context and service configurations defined above.

Finding Configuration Errors

Identify errors in your configuration file by entering the following command:
This command displays errors it finds within the configuration. For example, if you have created a service named
"service1", but entered it as "srv1" in another part of the configuration, the system displays this error.
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
Verifying and Saving Your Configuration
OL-22991-01