Description Of Interface - KERN CXP 30 K2 Operating Instruction

13.2 Description of interface

The selection of a certain operating mode allows you to set the output format, the
output control, the transmission speed and the parity bit.
Navigation in the menu:
Press
During this display press the
[FVnCT].
To select function, press number keys
To select parameters, press number keys:
Use the
To exit the menu, press the
Function selection
Key Weight
display
SERLE
XXX
XXX
-
-
STl XX
XX = see
table 1
Confirm setting by pressing the
values (max. 15)
36
key, [CEnTR] appears on the reference weight display.
= up, = down,
key to store
Parame-
ter se-
lection
Display
Display
refer-
number of
ence
pieces
weight
-
LEn B
-
LEn C
XXXXX -
XXXXX -
061210
DATE
151707
TKnnE
hrs/min/s
- -
key, on the weight display appears
= left, = right
key
Description of function
Not documented
Not documented
Not documented
Setting date
Setting time
For display format, see also example in
chpt. 13.2.1
key, then enter the number of output
CXB/CXP-BA-e-0812