Configuring Interfaces (Communication) - KERN ITB Operating Instruction

ITB-BA-e-0720
3.6
3.6.1
Print
A.Print
CONtINU
dIALOG
CONt.OLd
dIAL.OLd
dt-b
GROSS
tArE
nEt
dt-G
COnt-Wt
2nd.dISP
3.6.2
tEmPLat
StdArd
tEmPLt1
tEmPLt2
ASCi.FmtT
LINE.Fmt
LENGtH
SEPArAt
Add LF
3.6.3
bAUd
PAritY
H.SHAKE
User manual ME-Nr. 22017071 01/07

Configuring interfaces (COMMUNICATION)

COM1/COM2 -> MODE – operating mode of the serial interface
Manual data output to the printer with
Automatic output of stable results to the printer (e. g. for series weighing operations)
Ongoing output of all weight values via the interface
Bi-directional communication via MT-SICS commands, control of the scale via PC
As per CONtINU, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
As per dIALOG, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
DigiTOL-compatible format.
•
Transfer of the gross weight, identified with "G"
•
Transfer of the tare weight
•
Transfer of the net weight
As per dt-b, see above, gross weight identified with "G"
TOLEDO Continuous mode
For connecting a second display (automatically activates the 5-V voltage supply at
Pin 9)
COM1/COM2 -> PRINTER – settings for protocol printout
This menu item only appears if the mode "Print" or "A.Print" is selected.
Selecting protocol printout
•
Standard printout
•
Printout in accordance with Template 1
•
Printout in accordance with Template 2
Selecting formats for the protocol printout
•
Line format: MULtI (multi-line) or SINGLE (single-line)
•
Line length: 0 ... 100 characters, appears only with line format MULtI
• Separator: , ; . / \ _ and space; appears only with line format SINGLE
•
Line feed: 0 ... 9
COM1/COM2 -> PARAMET – communication parameter
Selecting baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 baud
Selecting parity: 7 none, 8 none, 7 odd, 8 odd, 7 even, 8 even
Selecting Handshake: NO, XONXOFF
Settings in the menu
25