Gateway Rear Panel
Figure 2. Gateway rear panel
The rear panel includes the following connectors, viewed from top to bottom:
•
Four Gigabit Ethernet LAN ports. To connect local computers, use these ports.
•
USB port. To connect a USB hard drive, flash drive, or printer, use this port.
•
Reset. To set the gateway to the original factory settings, press and hold the Reset
button for over 7 seconds. See
•
Coaxial cable connector. Attach a coaxial cable to the cable service provider's
connection.
•
Power. Power adapter input.
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Ethernet LAN ports
USB port
Reset button
Coaxial cable connector
Power adapter input
Factory Default Settings
Connecting to the Internet
on page 54.
8