Use Second Extruder For Different Object Or Part Of An Object - FELIXrobotics FELIX 3.0 User Manual

7.2.2.2

Use second extruder for different object or part of an object.

This short tutorial will show you how to print two objects in a single print with different extruders.
You basically need two STL files which are created in the same coordinate system and with exact needed
distance with respect to each other.
For this example two simple parts were created, see picture below.
Press the open button
Assumed is that you configured the slicing settings as in previous section for dual extrusion.
Select two STL files at once. In this case the demo parts are used.
Click on the model in the right pane and a small window pops up. Here you can assign an extruder to
every part.
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer