FELIXrobotics FELIX 3.0 User Manual page 27

X_1_No support,
No support material is
generated. Part is
printed as imported.
In this example not
recommended.
- Printed part
- Support material
- Raft
- Heated bed
The profiles are easy to adjust and tweak yourself for further improvement. To do this just click the configure
button.
This will show a very large number of settings to tweak. Don't worry: every setting is well documented. If you
are interested in knowing more just click the question mark button as indicated in the figure below.
support@FELIXprinters.com
www.FELIXprinters.com
X_3_Full support
X_2_Exterior support
Automatic support
Automatic support
material generated material generated
outside and inside of the
outside of the object
object
User manual FELIX 3.0 3d printer
X_4_Full support + raft
Automatic support
material generated
outside and inside of
the object + a raft to
ensure good contact
with the heated bed.