FELIXrobotics FELIX 3.0 User Manual page 24

A simple representation of the different support material types material is shown here.
X_1_No support,
No support material is
generated. Part is
printed as imported.
In this example not
recommended.
- Printed part
- Support material
- Heated bed
Speed slider:
This will set the print speed. Increasing the print speed, has as penalty a less nice print-quality.
Infill Density:
Objects are filled with a certain density, this can range from empty to fully filled.
More than 70% infill is not recommended.
Enable cooling:
The just extruded filament is actively cooled, to ensure conservation of details especially useful for detailed
objects.
Filament settings:
Choose for each extruder the filament type you have currently in the extruder.
You can easily change settings of a selected profile if they still don't fit your needs, just click the
configuration button.
support@FELIXprinters.com
www.FELIXprinters.com
0
X_2_Exterior support X_3_Full support
Automatic support
Automatic support
material generated material generated
outside and inside of the
outside of the object
object
User manual FELIX 3.0 3d printer