FELIXrobotics FELIX 3.0 User Manual page 38

Press slice and after slicing activate the models+path option and move the path % slider to 0%. This is
the result:
The white lines are the support material and the other colors are the object itself. Next to the object
there is a prime pillar. This functions as a wipe tower and also primes the extruder when switching to the
new extruder.
To print the generated gcode, press Save. Then open it in repetier-host or place it on a microSD card for
directly printing it on your printer.
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer