Kisslicer - FELIXrobotics FELIX 3.0 User Manual

7.2 Kisslicer

Kisslicer is a separate program to generate gcode. It is an extremely fast slicer and generates impressive g-
codes. The program can be downloaded at our website in the download area. The package contains
optimized slicing profiles for the FELIXprinter.
For single extrusion this program is free of charge, to get the full functionality and enable dual extrusion
a license needs to be obtained from www.kisslicer.com.
The software is able to generate single and dual extrusion gcode. The program is able to create support
material with the second extruder. This can be beneficial, because it can print the support material with a
different material or the same material with a different temperature.
The following steps will guide you through the program.
7.2.1 Make a single extrusion print
1. Open kisslicer.exe and a STL file
2. Configure your slicing settings.
Choose quality:
Choose support type:
Choose print-mode (single or dual extrusion)
Choose what material the extruders are printing:
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer