Sfact - FELIXrobotics FELIX 3.0 User Manual

Override Slic3r Settings
Enabling this, overrides some settings of the selected print settings.
A brief description of the options:
Copy Print Settings to Override. This will copy the settings in the selected print setting to the fields of this
current window.
Enable support, this enables the generation of support material where needed.
Enable cooling, enables cooling of the object during printing. This normally improves print quality
especially for detailed objects.
Layer height, the height of each printed layer.
Infill density, the percentage of infill of the object. 0 means a hollow object. 100% means fully filled.
Infill pattern, pattern of the infill.
Solid infill pattern, patter of the infill for the bottom and top of the object.
7.1.1.3

SFACT

This slicer is an old slicer and has been used for older versions of Repetier-Host. This slicer is only able to
generate g-code for single extrusion. It is the slowest of them all, but is very reliable.
There is a large choice of slicing profiles. For the first test it is recommended that you choose the
2_1_Normal_Quality profile.
Short explanation of the slicing profiles:
Profile 1_1 to 3_4: are profiles setup for everyday printing.
Profile 4_1 to 4_5: are profiles optimized for our production parts. These are the profiles used to produce the
printed parts of your printer. When printer upgrades are provided, these are recommended to use for slicing
the parts.
Profile 5_1 to 5_2: are used for specific cases
Profile 6_1 and further: are used for testing purposes.
The structure of the profiles 1 to 4 is done like this:
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer