Assign An Extruder To An Object - FELIXrobotics FELIX 3.0 User Manual

7.1.2.3

Assign an extruder to an object.

This short tutorial will show you how to print two objects in a single print with different extruders.
You basically need two STL files which are created in the same coordinate system and with exact needed
distance with respect to each other.
For this example two simple parts are created, see picture below.
In Repetier-Host open the two files
It should now look like this:
Select demo_pt2 and drag it into object group 2
It looks like this:
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer