Crestron DM-RMC-100-C Operations & Installation Manual page 9

Crestron DM-RMC-100-C
Operations & Installation Guide – DOC. 7000C
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed
Ethernet networking for a total signal distribution solution. The DM-RMC-100-C
includes a 10BASE-T/100BASE-TX Ethernet port, providing a convenient LAN
connection for a local network device.
Embedded Device Control
The DM-RMC-100-C includes built-in RS-232, IR, and Ethernet control ports to
allow programmable control of the display device connected to it. It can also provide
an alternative to such conventional control methods by harnessing the CEC
(Consumer Electronics Control) signal embedded in HDMI. Through its connection
to the control system, the DM-RMC-100-C provides a gateway for controlling the
display device through the HDMI connection, potentially eliminating the need for
any dedicated control wires or IR emitters.
Low-Profile Installation
The DM-RMC-100-C mounts conveniently on a wall, ceiling, or other flat surface.
At just one inch deep, it fits easily behind a flat panel display or above a ceiling
mounted projector. All connections and LED indicators are positioned on the sides,
ensuring optimal access and visibility for a clean, serviceable installation. An array
of indicators is provided for easy setup and troubleshooting.
DigitalMedia 8G+ Receiver 100
DigitalMedia 8G+ Receiver 100: DM-RMC-100-C  3