Crestron DM-RMC-100-C Operations & Installation Manual page 8

DigitalMedia 8G+ Receiver 100
2  DigitalMedia 8G+ Receiver 100: DM-RMC-100-C
Features and Functions
(Continued)

Allows quick, easy setup and diagnostics

Low-profile surface mount design

Powered over the DM connection or local power pack (included)
DigitalMedia 8G+
DigitalMedia 8G+ provides a true one-wire transport for moving high-definition
video, audio, and Ethernet over low-cost twisted pair cable without compression or
repeaters. Engineered for ultra high bandwidth and ultimate scalability, DM 8G+
handles uncompressed video beyond high definition with support for HDCP, Deep
Color, and 3D. Audio capabilities include support for high bitrate 7.1 audio formats
such as Dolby TrueHD and DTS-HD Master Audio as well as uncompressed linear
PCM. All signals are transported over one 8-conductor twisted pair cable (sold
separately), supporting distances up to 330 feet (100 meters) using Crestron DM 8G
2
cable or CAT5e.
HDBaseT
DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications,
ensuring interoperability with third-party HDBaseT products. Via its DM 8G+ input,
the DM-RMC-100-C can be connected directly to any HDBaseT compliant source
without requiring a DM transmitter. HDBaseT connectivity through the
DM-RMC-100-C converges uncompressed full HD digital video, audio, Ethernet,
power and control signals through a single CAT5e or CAT6 cable over distances up
to 328 feet (100 meters).
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-C,
supporting HD 1080p video and WUXGA computer signals with HDCP, Deep
Color, 3D, and multi-channel HD lossless audio—all through one connection.
The HDMI output can also handle DVI signals using an appropriate adapter or
3
interface cable.
A single cable connects the DM-RMC-100-C to a DM switcher or transmitter or to
an HDBaseT source (each sold separately), transporting video, audio, control,
networking, and power signals through one RJ-45 connection.
DM-RMC-100-Cs may be installed to handle each display in a multi-room
distribution system, all fed from a central DM switcher. Or, a single
DM-RMC-100-C can be fed straight from a DM 8G+ transmitter, affording a very
simple solution for extending a computer or AV signal to a single display.
1. Receiving Power over DM (PoDM) or Power over HDBaseT (PoH) requires connection to a switcher
or other equipment that has a PoDM or PoH PSE (Power Sourcing Equipment) port.
2. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL
DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or
STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices. Shielded cable
and connectors are recommended to safeguard against unpredictable environmental electrical noise
which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron
DigitalMedia Design Guide (Doc. 4546) for complete system design guidelines. DM 8G+ is also
compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.
All wire and cables sold separately.
3. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI
interface cable sold separately.
Crestron DM-RMC-100-C
1, 2
Operations & Installation Guide – DOC. 7000C
1
Multiple