Crestron DM-RMC-100-C Operations & Installation Manual page 25

Crestron DM-RMC-100-C
Operations & Installation Guide – DOC. 7000C
The system tree of the control system displays the DM-RMC-100-C in the
appropriate slot with a default IP ID as shown in the following illustrations.
In the first example, the DM-RMC-100-C is used with the DMCO-50
output card in a DM-MD8X8 switcher. In the second example, the
DM-RMC-100-C is used with the C2ENET-2 card in an Ethernet slot on
the control system.
C2ENET-2 Device, Slot 8 (Using Output Card in DM Switcher)
DigitalMedia 8G+ Receiver 100: DM-RMC-100-C  19
DigitalMedia 8G+ Receiver 100