Crestron DM-RMC-100-C Operations & Installation Manual page 18

DigitalMedia 8G+ Receiver 100
12  DigitalMedia 8G+ Receiver 100: DM-RMC-100-C
4. The DM IN port consists of one RJ-45 connector. Refer to the following table for the connector
pinouts.
DM IN Connector Pinouts
PIN # WIRE COLOR
1 Orange/White
2 Orange
3 Green/White
4 Blue
5. Receiving Power over DM (PoDM) or Power over HDBaseT (PoH) requires connection to a switcher
or other equipment that has a PoDM or PoH PSE (Power Sourcing Equipment) port.
6. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL
DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or
STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices. Shielded cable
and connectors are recommended to safeguard against unpredictable environmental electrical noise
which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron
DigitalMedia Design Guide (Doc. 4546) for complete system design guidelines. DM 8G+ is also
compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.
All wire and cables sold separately.
Crestron DM-RMC-100-C
1 8
PIN # WIRE COLOR
5 Blue/White
6 Green
7 Brown/White
8 Brown
Operations & Installation Guide – DOC. 7000C