Crestron DM-RMC-100-C Operations & Installation Manual page 26

DigitalMedia 8G+ Receiver 100
20  DigitalMedia 8G+ Receiver 100: DM-RMC-100-C
C2ENET-2 Device, Slot 8 (Using Ethernet Slot on Control System)
2. If additional DM-RMC-100-C devices are to be added, repeat step 1 for
each device. Each DM-RMC-100-C device is assigned a different
IP ID.
3. If necessary, double-click a device to open the "Device Settings" window
and change the IP ID as shown in the following illustration.
"Device Settings: Crestron DM-RMC-100-C" Window
NOTE: The ID code specified in the SIMPL Windows program must
match the IP ID of each unit. Refer to "Identity Code" on page 13.
Crestron DM-RMC-100-C
Operations & Installation Guide – DOC. 7000C