Drawing On The Screen - Intermec CK60 User Manual

Drawing on the Screen

CK60 Mobile Computer with Windows Mobile User's Manual
• Hyphenated words, foreign words that use special characters such as
accents, and some punctuation cannot be converted.
• If you add writing to a word to change it (such as changing a "3" to an
"8") after you attempt to recognize the word, the writing you add is not
included if you attempt to recognize the writing again.
You can draw on the screen in the same way that you write on the screen.
The difference between writing and drawing on the screen is how you select
items and how they are edited. For example, you can resize selected
drawings, while you cannot resize writing.
To create a drawing
• Select Menu > Draw, then draw a line to initiate a drawing box.
Subsequent strokes in or touching the drawing box become part of the
drawing.
Note: You may want to change the zoom level so that you can easily work
on or view your drawing. Tap Menu > Zoom, then select a zoom level.
If you want to edit or format a drawing, you must select it first.
To select a drawing
• Tap and hold the stylus on the drawing until the selection handle
appears.
• To select multiple drawings, deselect the Pen icon and then drag to
select the drawings you want.
You can cut, copy, and paste selected drawings by tapping and holding the
selected drawing and then tapping an editing command on the pop-up
menu, or by tapping the command under Menu. To resize a drawing,
make sure the Pen icon is not selected, and drag a selection handle.
Chapter 2 — Windows Mobile
The drawing box indicates the boundaries of the drawing
39