Autoexec - Intermec CK60 User Manual

Chapter 3 — Configuring the Computer
autocopy

AutoExec

86
AutoExec is reserved for Intermec use to configure Intermec-specific
applications. It launches the CAB installer, AutoCab (AutoCab.exe), to
install platform cab files to the system, such as Intermec Data Collection.
When the AutoExec.exe process completes, Run Autorun then checks for
the existence of AutoRun (AutoRun.exe) and executes this program from
the first media it is found on. This order is the same as what is used by
AutoExec.
AutoRun is reserved for customer use to configure application launch
sequences. It launches the CAB installer, AutoCab, as well as any customer
programs that added to the AutoUser.dat file and is described on the next
page. The hierarchy of these files is shown below.
autoexec
autoreg foldercopy
AutoExec (AutoExec.exe) automates operations such as pausing, launching
processes, or signaling, and is configured through the AutoExec data file
(AutoExec.dat). This script file must be in the same directory as the
program itself.
Note: Intermec considers the usage of the AutoExec data file as "Intermec
Private." AutoExec installs Intermec applications such as Data Collection,
Security Supplicants, Intermec Management, applets, and shortcuts from
components found in the Flash File System. Do not modify the AutoExec
data file. Instead, use the AutoRun program to add software components.
Usage:
AutoExec [-%[W]] [-E=["X"]] [-F=["Y"]] [-LOG=] [-W=[Z]]
-% Passes an ID to use in a call to SignalStarted. This argument is useful only during
system startup that relies on a SignalStarted to call. W is an integer value.
-E Passes a signal event name to use when autoexec completes. X is a string value.
-F Overrides the data file to use. This must be a fully qualified name. Default is
"autoexec.dat" in the same location as the AutoExec.exe program. Y is a string
value.
-LOG Set to any value logs activity to AutoExec.txt (in the same location as the
AutoExec.exe program). Default is disabled.
-W Pauses the autoexec process by calling sleep for the number of seconds specified
by Z. Z is an integer value.
CK60 Handheld Computer with Windows Mobile User's Manual
runautorun
autocab
autorun
customer
autocab
applications