Cleaning The Air Filter Element - E-TON Viper 150 Owner's Manual

E-ton viper 150 atv owner's manual
Hide thumbs Also See for Viper 150:
Table of Contents

Advertisement

Tightening torque:
Final transmission oil drain bolt:
25 Nm (2.5 m·kgf, 18.1 ft·lbf)
5. Add the specified amount of the recommend-
ed final transmission oil, and then check the
oil level.
Recommended final transmission oil:
See page 10-2.
Oil quantity:
0.75 L (0.79 US qt) (0.88 Imp.qt)
NOTICE
8
Be sure no foreign material enters the final
transmission case.
6. Install and tighten the oil filler cap.
7. Check the final transmission case for oil leakage.
If oil is leaking, check for the cause.

Cleaning the air filter element

The air filter element should be cleaned at the in-
tervals specified in the periodic maintenance and
lubrication chart. Clean the air filter element more
frequently if you are riding in unusually wet or dusty
areas.
1. Remove the air filter case by removing
the bolts.
1
1. Air filter case
8-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents