E-TON Viper 150 Owner's Manual page 21

Start switch "START"
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
Light switch "LIGHTS"
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch
to " " to turn off all the lights.
NOTE:
The headlights and the taillight can be turned on
only when the engine is running.
" to turn on the low beams
" to turn on
Horn switch "HORN"
The horn button is a yellow push switch, located
below the turning signal lamp switch on the left-hand
handlebar. Pressing in on the button will sound
the audible horn signal.
Releasing the button will silence the horn.
4-3
4