Installing A Wheel - E-TON Viper 150 Owner's Manual

Installing a wheel

1. Install the wheel and the nuts.
TIP
When installing the wheel, make sure its arrow
mark points toward the rotating direction of the
wheel.
Front
1
8
1. Arrow mark
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nuts:
45 Nm (4.5 m·kgf, 33 ft·lbf)
Rear wheel nuts:
45 Nm (4.5 m·kgf, 33 ft·lbf)
8-31