Throttle Lever; Drive Chain; Tires; Tire Pressure - E-TON Viper 150 Owner's Manual

Brake operation
Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brakes for wear. (See pages 8-20 and 8-23.)

Throttle lever

Check the operation of the throttle lever. It must
5
open smoothly and spring back to the idle position
when released. Have an E-TON dealer correct if
necessary.

Drive chain

Check the condition of the drive chain and check
the drive chain slack. Lubricate and adjust the drive
chain as necessary. (See page 8-29.)

Tires

Check tire pressure regularly to make sure it is at
the recommended specifications. Also check for
wear and damage.

Tire pressure

Use the tire pressure gauge to check and adjust tire
pressures when the tires are cold. Tire pressures
must be equal on both sides.
WARNING
Operation of this vehicle with improper tire
pressure may cause severe injury or death from
loss of control or rollover. Tire pressure below
the minimum specified could also cause the tire
to dislodge from the rim under severe riding
conditions.
5-4