Kickstarter - E-TON Viper 150 Owner's Manual

To install the seat
Insert the projection on the front of the seat into the
seat holder and push down on the seat at the rear.
TIP
Make sure that the seat is securely fitted.
4
2 1
1. Projection
2. Seat holder

Kickstarter

A kickstarter lever is located under the seat to use
if the battery is discharged.
1. Install the kickstarter lever.
2. Move the kickstarter lever down lightly with your
foot until the gears engage, and then push it
down smoothly but forcefully.
1
1. Kickstarter
NOTICE
Do not use the kickstarter if there is no battery
installed or if the battery leads are disconnected.
WARNING
A WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
4-12