3Com 3102 Manual page 71

Table 9 VCX Feature Codes (Alphabetical by Feature or Task)
Feature
Speed Dial — Display
Transfer
Transfer to Voice Mail
(Enable/Disable)
Transfer to Another User's
Voice Mail
User Directory
Volume — DTMF
Volume — Up or Down
Feature Code Entry
Feature + 463
Feature + 420, then <destination> +
hang up
Feature + 440
Or
*440
Feature + 441, then <destination>
Or
Transfer, then*441*<destination>, then
Transfer
Feature + 461
Feature + 329
Feature + 102 to raise the volume
or
Feature + 103 to lower the volume
Feature Codes
Description
Lists the configured speed dial numbers
in the Display Panel.
This is an unattended transfer. For an
attended transfer, see Transferring a
Call.
When enabled, transfers all calls to the
voice mail. See Forwarding Calls to Voice
Mail.
See Transferring a Call to Another User's
Voice Mail.
Lists the users in the local user directory
or, if enabled, the users in the global
user directory. See Viewing the User
Directory.
Adjusts the volume heard when a
keypad button is pushed. After entering
Feature + 329, press the up or down
volume buttons on the phone to raise or
lower the DTMF volume.
Adjusts the volume setting for the
current mode:
If the handset is in the cradle and the
speaker is disabled, adjusts the ring
volume setting.
If the speaker is enabled, adjusts the
speaker volume setting.
If the handset is not in the cradle and
the speaker is disabled, adjusts the
handset volume setting.
See Controlling the Volume.
71