Specifying Matrox Max H.264 Settings For Final Cut Pro - Matrox MXO2 Installation And User Manual

80
In the Encoder pane of the Inspector window, click Settings beside Audio
10
to set your audio settings.
¦ Note
choose AAC (advanced audio coding) as your export audio file format. To do
this, in the Sound Settings window, select AAC from the Format list.
In the Geometry pane of the Inspector window, set the Frame Size that
11
you want for your encoded video. Matrox CompressHD supports the
following compression frame sizes and aspect ratios:
¦ Note
closest supported frame size will be used.
Click Save .
12
Specifying Matrox MAX H.264 settings for Final
Cut Pro
This section details how to specify the Matrox MAX H.264 compression settings
in Final Cut Pro for exporting to QuickTime. The Matrox MAX H.264
compression settings are the same when exporting to QuickTime from other
QuickTime-based video applications, such as QuickTime Pro. For details on how
to export to QuickTime, see the application's documentation.
Open Final Cut Pro, and open the project that you want to export.
1
Choose File > Export > Using QuickTime Conversion .
2
Chapter 9, Using the Matrox MAX H.264 codec
To export a clip for use with Apple iPod or iPhone devices, you must
Frame size
320×136
320×180
320×240
640×272
640×360
640×480
720×480
720×576
960×540
1280×544
1280×720
1280×960
1920×1080
If you select a frame size that is not supported by CompressHD, the
Aspect ratio
2.35:1
16:9
4:3
2.35:1
16:9
4:3
4:3 or 16:9
4:3 or 16:9
16:9
2.35:1
16:9
4:3
16:9