Creating And Editing Mxo2 Device Control Presets - Matrox MXO2 Installation And User Manual

64
¦ Note
If this occurs, you will not be able to set the Input option from the Capture
Preset Editor
message, and under QuickTime Video Settings , click Advanced . In the
Video
the format to which you want to capture, and then click OK .
$
6 Type an appropriate Name and Description .
Click OK .
7
8 If you're editing a capture preset, click OK in the Audio/Video Settings
window to save your edits.
Creating and editing MXO2 device control
presets
¦ Note
A Matrox MXO2 device control preset is required only when using the MXO2
RS-422 serial connector for device control.
Open Final Cut Pro and choose Final Cut Pro > Audio/Video Settings .
1
Click the Device Control Presets tab.
2
Select the device control preset that you want to use as a starting point for
3
creating a new preset, or select the device control preset that you want to
edit.
Click Duplicate to create a new preset, or click Edit .
4
¦ Note
overwritten.
In the Device Control Preset Editor window, select your settings. To be
5
compatible with Matrox MXO2, the device control preset must have the
following settings:
$
$
Type an appropriate Name and Description .
6
Click OK .
7
If you're editing a device control preset, click OK in the Audio/Video
8
Settings
Chapter 8, Using Matrox MXO2 with Supported Programs
A General Error message may appear when you select the digitizer.
window. To set the capture input option, close the error
window, click Source , select the Matrox MXO2 setting that matches
Under QuickTime Audio Settings , from the Device menu, click
Matrox MXO2 Audio Input
Matrox MXO2 Mini does not support device control.
If you click Edit , the preset that you selected in step
From the Audio Mapping menu, click 8 Channels .
From the Port menu, click Matrox MXO2 RS-422 Port .
window to save your edits.
.
3 will be