Specifying Your A/V Input Settings (Mxo2 And Mxo2 Rack Only) - Matrox MXO2 Installation And User Manual

To indicate whether or not MXO2 is presently locked to your external
genlock source, the status will be displayed next to the Genlock format
menu as Locked or Not locked .
From the Genlock format menu, select the video format of your external
4
genlock source.
¡ Important To ensure good output results, make sure that your genlock
source's video format is compatible with the MXO2 video output format.
Use the horizontal and vertical settings under Video Output Timing Offset
5
to adjust the timing of the video output relative to your external genlock
source. This lets you compensate for cable delays within your system.
Specifying your A/V input settings (MXO2 and
MXO2 Rack only)
You can select the MXO2 video and audio inputs to be used as your capture
source. Only one video and audio input source can be used at a time. You can
also capture your video to a different format than your source video by enabling
scaling on the input. For descriptions of the MXO2 inputs, see
page 88. For a list of the input and capture formats that are supported on MXO2,
and to view the MXO2 input scaling options, see
Supported Input and Capture
¦ Note The HDMI video input does not support SD video for capture. When
capturing RGB material from a DVI source using MXO2's HDMI input, you
must use an external genlock source (see
page 38).
1 From the Apple menu, click System Preferences , and then click the
Matrox MXO2
Formats."
"Specifying your genlock settings"
icon.
"Inputs"
Appendix C, "Matrox MXO2
Defining your MXO2 settings
39
on
on