Specifying Your A/V Input Settings (Mxo2 Mini Only) - Matrox MXO2 Installation And User Manual

42
If using MXO2's SDI input to capture Panasonic VariCam 720p at 23.98
8
material, that is output at 720p at 59.94 by your VariCam device, select
Enable VariCam capture
frames from the VariCam input during capture and reconstruct the original
720p at 23.98 video.
¦ Note
source (see
only)"
Specifying your A/V input settings (MXO2 Mini
only)
You can select the MXO2 Mini video and audio inputs to be used as your capture
source. Only one video and audio input source can be used at a time. You can
also capture your video to a different format than your source video by enabling
scaling on the input. For descriptions of the MXO2 Mini inputs, see
page 88. For a list of the input and capture formats that are supported on MXO2
Mini, and to view the MXO2 Mini input scaling options, see
"Matrox MXO2 Supported Input and Capture
¦ Note
From the Apple menu, click System Preferences , and then click the
1
Matrox MXO2 Mini
Click A/V Input .
2
Chapter 6, Installing Your MXO2 Software and Configuring Your System
To capture VariCam material, you must select SDI as your video input
"Specifying your A/V input settings (MXO2 and MXO2 Rack
on page 39).
The HDMI video input does not support SD video for capture.
icon.
. Matrox MXO2 will remove the redundant (filler)
Formats."
"Inputs" on
Appendix C,