Specifying Your Video And Audio Output Device Settings; Specifying Settings For Final Cut Pro - Matrox MXO2 Installation And User Manual

66
In the General pane, select Medium or High from the Audio Playback
6
Quality
Assign the audio track that contains the Matrox 4VANC closed caption data
7
on your timeline to audio output eight.
Remarks
• To preserve the integrity of the closed caption data for playback, do not
manipulate the audio track that contains the closed caption data in any way.
For example, do not adjust the audio gain or balance, or add audio effects to
the tracks.
• See also
page
Specifying your video and audio output device
settings
The following sections explain how to specify your video and audio output
device settings for Final Cut Pro and Adobe After Effects. Many programs share
similar output device settings as Adobe After Effects, however, you should refer
to your program's documentation for more details.
¦ Note
using MXO2, see

Specifying settings for Final Cut Pro

1 Open Final Cut Pro and choose View > Video Playback .
Select the Matrox MXO2 setting that matches your project's sequence
2
setting.
3 Choose View > Audio Playback , and select Matrox MXO2 Audio
Output
¦ Note
Matrox MXO2 Audio Output
selected an MXO2 setting for video playback.
Enable Final Cut Pro's external video by choosing View > External
4
Video > All Frames
Chapter 8, Using Matrox MXO2 with Supported Programs
menu.

"Specifying your video and audio output device settings"

66 for general video and audio output settings for Final Cut Pro.
If you want to play back video with closed captioning that was captured
"Settings for playing back closed captioning"
.
If Audio Follows Video is enabled in the Audio Playback menu,
.
will be automatically enabled once you've
on
on page 65.