Connecting MXO2 Rack to your Mac system
Connect MXO2 Rack to your Mac Pro or MacBook Pro using the Matrox PCIe
cable. For MXO2 Rack to be detected on a Mac Pro system, power must be
supplied to MXO2 Rack (see
be connected to your Mac Pro before starting up your computer.
¡ Important Do not disconnect the Matrox PCIe cable from the adapter, or
MXO2 Rack, when your Mac system is running. To safely remove the Matrox
PCIe host Expresscard/34 adapter, see
ExpressCard/34 adapter"
MXO2 Rack
PCIe cable
A
"Powering MXO2 Rack"
on page 8.
²Caution
when connecting the PCIe cable to avoid
damaging the cable or host connector.
Matrox PCIe
host adapter
OR
A
Connecting MXO2 Rack to your Mac system
on page 20), and it must
"Removing your PCIe host
Ensure proper orientation
Matrox PCIe host
ExpressCard/34
adapter
To your MacBook Pro's
ExpressCard/34 slot (see
your PCIe host ExpressCard/34
adapter (for laptops)"
"Installing
on page 7).
21