Cooper Security i-on40 Administrator's And User Manual page 77

i-on40 & i-onEX Range
3. Key in your access code (or
present a tag).
4. Press  until you see:.
5. Press .
The display shows:
6. Press  until you see:
7. Press .
The display asks you to press
any button on the remote (or
two-way keyfob) you wish to
test.
If there are no remotes or two-
way keyfobs available the
display briefly shows:
8. Press a button on the device
you wish to test (you should
press and hold the button
down until the transmit LED on
the device flashes).
The keypad gives a double
"beep" confirmation tone.
The top line of the display
shows: the number of the
device, the button you
pressed, and the user the
device is allocated to. (The line
will show the user‟s name if it
has been programmed.)
The bottom line of the display
shows the function of the
button you pressed and the
strength of the signal received
by the system from the
4. Administration














Page 71