Cooper Security i-on40 Administrator's And User Manual page 15

i-on40 & i-onEX Range 1. Introduction
user‟s type. In a partitioned system all master users always
belong to all partitions.
Administrator This user is similar to a master user, but in a
partitioned system is limited to one or more partitions. Admin
users can create, delete or edit other users (including Admin
users) belonging to the same partition(s) but cannot create or
delete Master users. Admin users can assign other users to any of
the partitions that the Admin user belongs to, but cannot assign
users to partitions that the Admin user does not belong to.
Normal User A normal user cannot add any other user to the
system, or remove them. A normal user can set and unset the
system, change their own access code, switch the Chime function
on and off, and operate any outputs that the installer has made
available. In a partitioned system a normal user is assigned to
one or more partitions, which are the only parts of the system
that they can set and unset.
Partition User A partition user is similar to a Normal User, but
has the added restriction that they must set and unset their
allocated partitions from keypads that are also assigned to those
partitions.
Duress Code A duress code is similar to a Normal User, but
whenever a user sets or unsets the system with a duress code the
control unit notifies the alarm receiving centre. The Installer must
program your system to provide this feature, and you must agree
with your alarm installer and the ARC what action the ARC should
take on receiving a duress message.
Guard A guard can only unset the system when it is in alarm,
reset it, and then set the system again. A guard cannot change
their own access code or add/remove another user. In a
partitioned system the guard can be allocated to one or more
partitions, which are the only parts of the system that they can
set and unset.
Set Only This type of user can set the system, but not unset it. A
set only user cannot change their access code or add/delete
another user. In a partitioned system a Set Only user can be
allocated to one or more partitions, which are the only parts of
the system that the user can set.
Page 9