Cooper Security i-on40 Administrator's And User Manual page 105

i-on40 & i-onEX Range
If you selected "Partitions" in step
10c) the display shows:
c) Press  or  to select the
user‟s partition that you want
to change.
d) Press  to select between
"No", "Full" or "Part".
"No" = No effect.
"Full" = Full Set
"Part" = Part Set
e) Press  when you have
finished making the changes
you want.
The keypad gives a double
"beep" confirmation tone. The
keypad display shows:
12. Press  twice.
If you want to program other
user remotes repeat steps 8
to 11.
13. Press  repeatedly to leave
the menu when you have
finished.
Operate an Output
To program a remote button to operate an output:
1. Make sure the display shows
the standby screen.
2. Press .
3. Key in your access code (or
present a tag).
4. Administration
















Page 99