Compliance Statement - Cooper Security i-on40 Administrator's And User Manual

i-on40 & i-onEX Range

Compliance Statement

The i-on50EX and i-on160EX:
Are suitable for use in systems designed to comply with
PD6662:2010 at Grade 2, Grade 3 and environmental class
II.
Are suitable for use in systems designed to comply with the
requirements of EN50131-3 at Grade 2, Grade3 and
environmental class II.
Comply with the requirements of EN50131-6:2008 at Grade
2, Grade 3 and environmental class II.
The i-on30EX and i-on40:
Are suitable for use in systems designed to comply with
PD6662:2010 at Grade 2, and environmental class II.
Are suitable for use in systems designed to comply with the
requirements of EN50131-3 at Grade 2 and environmental
class II.
Comply with the requirements of EN50131-6:2008 at Grade
2 and environmental class II.
When fitted with the appropriate communicator these products
are compliant with EN 50136-1. They allow the alarm
transmission system to meet the performance requirements of EN
50131-1:2006 ATS 2 provided that:
a) They are installed in accordance with the installation
instructions.
b) The connected PSTN is functioning normally.
If the installer selects a non-compliant configuration then
they must remove or adjust compliance labelling
Please Note:
This Guide applies to i-on control units with version 4.00 software.
Page v