Cooper Security i-on40 Administrator's And User Manual page 54

4. Administration
c) Press  or . until the
bottom line of the display
shows your own user name or
number.
d) Press .
e) Press  or . until the bottom
line of the display shows:
f) Go on to step 6.
If you are a Normal User:
6. Press .
7. Press .
8. Key in the new access code .
Access codes are four digits
long (for Security Grade 2 or
i-on30EX/i-on40) or six digits
long (for Security Grade 3).
When you press the last digit
of the access code the display
asks you to confirm by keying
in the same code again.
9. Key in the same digits again,
in the same order.
The keypad gives a double
"beep" confirmation tone. The
keypad display shows:
If a user forgets their code then a Master or Admin user must
delete that user from the system (see page 59), and recreate a
new user with a new code (see page 56).
Page 48
i-on40 & i-onEX Range














followed by:

