Advanced Recording; Alarm Recording - Nuvico DV turbo NVDV4-16000 Instruction Manual

4. ADVANCED RECORDING

Advanced recording comprise of alarm, motion and schedule recording. Unlike the continuous recording
mode which records 24 hours a day and seven days a week based on the same settings, these three
recording options provides the user the flexibility of customizing the record settings, thus making the most
of the hard disk drive usage. Moreover, using these features would shorten search time when the needs
arise, as the recorded can be directly accessed from the system logs.

4.1 ALARM RECORDING

Please verify the alarm record settings prior to starting alarm recording. The settings can be adjusted
from the ALARM setup. Please refer to page 65 for detailed instructions. Please note that alarm
recording is independent of any recording modes.
If the alarm buzzer is set to ON and if the alarm inputs are selected, then the alarm buzzer will sound for
the duration of the RECORD TIME. Pressing the – button will turn off the buzzer, and pressing + button
after will turn the buzzer back on. Press CANCEL button will turn off the alarm circuit.
If an e-mail address has been registered under the NETWORK setup menu, then an e-mail including a
picture will be sent out to notify of the alarm recording.
Press the RECORD button and the record icon will appear
as shown on the left. The DVR will be in standby mode
until an alarm is triggered.
Alarm record icon will appear on the channel alarm was
triggered. The channel number will turn yellow as it starts
to record. The illustration on the left shows channel 3 in
alarm recording mode. The duration of the recording will be
based on the RECORD TIME setting under ALARM SETUP.
44
DV TURBO SERIES DVR