Advanced Recording; Alarm Recording - Nuvico NVJV-4000 Instruction Manual

4. ADVANCED RECORDING

1. ALARM RECORDING

Please verify that the alarm feature has been activated under the appropriate group's
Record Camera setting under Record Setup menu. Also, verify that the appropriate
recording group has been selected from the Event Setup menu, and that post recording
duration and the alarm circuit input type have been selected.
If an e-mail address has been entered in the network setup menu, then an e-mail will be
sent out alerting an alarm recording. Please note that the NVJV DVR does global
recording, in which the DVR records all cameras when an event occurs from one of the
cameras.
Press the record button and the EVENT icon will
appear with a white dot as shown on the left. The
DVR is not recording as long as the dot is white.
When an alarm is triggered, the record LED will
turn solid and the dot next to the EVENT icon will
turn red. Alarm alert will appear on the channel
the alarm was triggered, and the channel icon will
turn red and will start to blink with the alarm alert.
The DVR will record for the duration of the post
recording duration. If the alarm buzzer is set to
on, then the alarm buzzer will sound for the
duration of the Record Duration.
page 53 for configuring the Record Duration.
37
Please refer to
JV SERIES DVR